Human Folly about “Blue-Pill”

index

• Bluepill diags V1 (mecrisp-stellaris-folkdoc.sourceforge.io):

  #Bluepill #microcontrollers #electronics #hardware diagnostic guide for use with #Mecrisp #Forth.

  on 02025-09-30
• Stm32F103C8 (st.com):

  the STM32F103C8T6 is the #STM32 in the #Blue-Pill

  on 02025-07-20
• STM32 HID bootloader (github.com):

  Another #STM32 #Blue-Pill #hardware #USB #bootloader firmware. “This is a driverless (no USB drivers needed, even on Windows) USB HID bootloader for STM32F10x and STM32F4xx devices. It doesn’t use ST libraries since they are bloated and buggy. Only CMSIS and some required system files and macros have been used from ST provided SDK.”

  on 02024-01-28
• Stm32Duino bootloader (github.com):

  "STM32duino" #USB #bootloader firmware for the #STM32 #Blue-Pill #hardware derived from maple-bootloader

  on 02024-01-28
• Programming an STM32F103 board using USB port blue Pill (medium.com):

  #tutorial for installing a #USB #bootloader (Roger Clark’s #stm32duino) for the #STM32 #Blue-Pill #hardware

  on 02024-01-28
• Buck50 (github.com):

  Mark R. Rubin’s GPL "buck50" #Sigrok #logic-analyzer firmware for #STM32 #Blue-Pill #hardware. Also comes with a CLI to puppet it over USB and use it, for example, as a USB UART.

  on 02024-01-28
• Turn 1 5 blue Pill STM32 board into a sigrok compatible logic analyzer (cnx-software.com):

  #Sigrok can now use #STM32 or compatible #Blue-Pill #hardware as a #logic-analyzer using the #buck50 firmware. 8 channels, 6 MHz, 5000 samples, stored only on transitions; also usable as a 1Msps dual-channel digital storage #oscilloscope with 5000 samples

  on 02024-01-28